Florida Certified General Contractor #CGC1539897 • 4.9 ★★★★★ (96 Reviews)
Horizontal Rolling & Sliding Impact Window Installation
Sliding windows roll horizontally on a stainless steel track instead of swinging outward, which suits pool cages, lanais, and tight side-yard setbacks where a hinged sash would hit furniture or railing.
Roller Carriage & Track System Design
Horizontal sliding windows carry one or two operable sashes on a bottom track with a set of nylon or stainless steel rollers under each panel, so the sash rolls side to side instead of swinging on hinges. Because the sash doesn't project outward, sliders work well in pool cage openings, narrow lanais, and anywhere code setbacks or furniture placement rule out a casement or awning window that swings into the space.
Impact-rated sliders use a heavier interlock stile at the center where the two sashes meet, since that's the weakest point in the assembly under wind load, reinforced with a multi-point lock that pulls the panels tight against the frame. Track systems are set with a slight positive slope to shed wind-driven rain, and every unit is glazed with laminated glass carrying a Miami-Dade NOA rated for the address's specific design pressure.
Why Choose Six Senses Builders?
Our 4-Step Engineering & Installation Process
Opening Measure & Track Slope Planning
The crew measures the rough opening and checks the sill slope so the finished track sheds water outward instead of pooling at the threshold.
Panel Count & Lock Configuration
Two-panel or three-panel configurations get specified along with interlock stile placement and multi-point lock hardware matched to the opening's wind pressure rating.
Track Set & Roller Adjustment
The bottom track is anchored level with proper slope, panels are hung on the rollers, and each roller is adjusted so the sash rolls smoothly without dragging.
Interlock & Weep Hole Verification
The crew checks that the interlock stile seats fully when locked and confirms weep holes at the sill are clear so wind-driven rain drains out, not in.
Horizontal Rolling & Sliding Impact Window Installation FAQs
❓ Do sliding windows leak more than other impact windows?
Not when the track is set with proper slope and the weep holes stay clear. Sliders rely on a tight interlock and a sloped sill to shed water, so leaks usually trace back to a clogged weep hole or a track that wasn't leveled correctly during install, not the window design itself.
❓ How many panels can a sliding window have?
Most residential openings use a two-panel slider with one fixed and one operable sash, or two operable sashes. Wider openings can run three panels with the center panel fixed. Panel count depends on opening width and the wind pressure rating needed for that elevation.
❓ Can I get screens with impact sliding windows?
Yes, sliding screens are available on most impact slider configurations and run on a separate track from the glass panel, so the screen slides independent of whether the window is open or closed. They're a common add-on for anyone who wants airflow without opening the heavy impact sash.
Six Senses Builders South Florida Service Radius
Corporate Headquarters
601 N Federal Hwy Suite 301, Hallandale Beach, FL 33009
Direct Phone Line
+1 (754) 243-4374 (24/7 Rapid Response)
State Licensure
Florida Certified General Contractor #CGC1539897