⚡ Florida Certified General Contractor #CGC1539897 • 20 Core Disciplines
Architectural Glazing, Construction Services & My Safe Florida Home (MSFH) Contractor
From Miami-Dade NOA certified hurricane impact windows and 12ft architectural pivot entryways to 24-gauge standing-seam metal roofing and turnkey $10k state grant management. Explore our 20 specialized service hubs below.
My Safe Florida Home (MSFH) Grant Program & Approved Contractor Services
Six Senses Builders is an approved, licensed Florida Certified General Contractor (#CGC1539897) participating in the My Safe Florida Home (MSFH) program. Florida homeowners can receive up to $10,000 in state grant funds (2-to-1 match) for approved hurricane mitigation improvements including Category 5 impact windows, exterior doors, and standing-seam metal roofing.
Florida Certified General Contractor Specialized Service Disciplines
Hurricane-Rated Glass Garage Doors
Sectional overhead full-view glass and aluminum garage doors engineered with 20-gauge galvanized U-bar structural trusses to resist +90/-110 PSF Category 5 hurricane wind loads.
Impact Window Installation
Complete engineering, structural bucking, and turnkey installation of Category 5 hurricane impact windows engineered for +110/-140 PSF design pressure.
Hurricane Window Replacement & Retrofit
Seamless removal of legacy single-pane windows, structural masonry tie-in restoration, and precision retrofit with modern thermal impact glazing.
12ft Monumental Pivot Doors
Architectural grand entry pivot doors up to 12 feet tall and 6 feet wide, featuring concealed subfloor hydraulic pivot hinges and Hurricane Large Missile NOA certification.
Energy-Efficient Low-E Glazing
High-performance double-silver and triple-silver Low-E 366 solar control coatings that block 95% of UV radiation and slash HVAC cooling loads by up to 35%.
Sliding Glass Pocketing Doors
Multi-slide and pocketing patio glass door arrays that vanish seamlessly into wall cavities, creating unobstructed indoor-outdoor coastal living vistas.
Frameless 90° Corner Glass
Post-free 90-degree corner glass assemblies utilizing stepped laminated interlayers and two-part structural silicone glazing for panoramic oceanfront views.
French & Terrace Impact Doors
Classic architectural outswing and inswing French doors equipped with 3-point stainless steel locking gear, compression weatherstripping, and high-impact glazing.
Casement & Awning Impact Windows
Heavy-duty crank-out casement and awning windows engineered with continuous dual EPDM compression seals that tighten as hurricane wind pressure increases.
Thermal Break Aluminum Framing
Architectural aluminum framing isolated with engineered polyamide structural thermal struts, eliminating frame heat conductivity and indoor condensation.
Kuraray SentryGlas Ionoplast Interlayers
Ultra-rigid ionoplast structural interlayers 5 times stronger and 100 times stiffer than conventional PVB, maintaining glass pane retention even after severe missile impact.
24-Gauge Standing-Seam Metal Roofing
Concealed-fastener architectural standing-seam metal roofing with mechanical seaming, providing 185+ MPH wind uplift protection and 50-year Kynar 500 longevity.
USA 2x6 Timber Framing & Cat-5 Tie-Downs
Engineered structural wood framing utilizing 2x6 Southern Yellow Pine #1 Dense studs, LVL structural headers, and continuous Simpson Strong-Tie foundation-to-roof tie-downs.
DuPont Tyvek Weather Barrier & Pan Flashing
Continuous exterior envelope weatherproofing featuring DuPont Tyvek commercial wrap, seamless liquid STPE sill pans, and vapor-permeable air barriers.
My Safe Florida Home $10,000 Grant Support
Complete turnkey assistance applying for and claiming up to $10,000 in State of Florida 2-to-1 matching grant funds for impact windows, doors, and roof hardening.
Florida PACE $0 Down Property-Tax Financing
Government-sponsored PACE financing covering 100% of impact windows, doors, and roofing with zero money down, repaid conveniently via annual property taxes.
HVHZ Permit Expediting & Sealed Engineering
Turnkey municipal permit expediting, aperture wind-load engineering calculations, and signed & sealed PE plans for every city in Palm Beach, Broward, and Miami-Dade.
Soundproof & Acoustic Impact Glazing
Acoustically engineered impact glass units combining varying glass pane thicknesses and acoustic PVB interlayers to eliminate up to 90% of exterior noise.
Custom Wood & Composite Pivot Doors
Artisanal custom architectural pivot entry systems blending exotic solid hardwoods with aerospace-grade composite cores to prevent tropical warping.
Curtain Wall & Architectural Glass Facades
Commercial-grade unitized curtain wall glass facades and two-story residential glass wall arrays engineered for extreme structural deflection resistance.
Post-Hurricane Rebuild & Fortification
Rapid-response structural rebuilding and post-storm fortification: restoring compromised rough openings, rebuilding concrete tie beams, and installing Cat-5 glazing.